Wireless Smart Irrigation Controller Latching Valve 5km Pump
Wireless Control Solar Supply
General introduction:
Automated irrigation becomes a trend with the development of smart
agriculture. In order to send appropriate amount water in proper
time to your farmland, we design this wireless irrigation system.
It will help you Start/OFF your solenoid valves on site wirelessly.
Users can control different valves on site at the control center
easily. No need to go field, run here and there to control each
valves manually one by one. This wireless control system will
really help you save a lot of time.
System includes
1. Master controller at Control center--to connect Hunter/Toro
irrigation controller
2. Pump controller at pump station--to control pump ON/OFF
3. Solenoid valve controller at field--each controller connects 4
valves
Features
1. Base station expandable
The main controller has 8 stations. We also provide 8-station
expander in order to connect 16 or 24 or 36 or 48 stations
irrigation controller.
2. Valve controller support solar power supply
Field valve controller has 4 port. Each one can connect 4 valves (1
station controller or 2 station controller also available). Valve
controller use solar power supply. It already has solar supply
circuit on board.
3. Pump ON-OFF automatically
Our pump controller turns pump on automatically if any one of the
solenoid valve is ON, switch off the pump if no valve is ON
automatically.
4. Base station automatically controls valves
You can automatically switch on any solenoid valve according the
scheduled irrigation controller’s program.
5. Wireless connection
No need to operate pump and valve manually. Can do all at control
room. No need to run here and there any more. Save time and energy.
6. Can check feedback from flow sensor (customize)
According flow sensor’s digital/analog input, we can check each
connected valve’s condition
7. Control distance around 5km at open area, no communication fee.
Benefits
- Lower labor costs
- Increase accuracy (e.g. smaller more frequent sets)
- Reduce water use (e.g. by night irrigation)
- Irrigating multiple, large, and/or remote properties can be very
labor intensive. In addition, it is often difficult to know exactly
when (or if) valves were activated, and whether or not the desired
duration or amount of water distribution was achieved. Furthermore,
in instances where immediate response is required, manual valve
activation may not be an option.
Parameter
| Master-Main controller | 24V DC power supply 8 isolated inputs (24V AC or 24V DC), 1 relay output can expand by 8-station 433MHz, 1W power output Communication port: RS485 |
| Master-Expander | 24V DC power supply 8 isolated inputs (24V AC or 24V DC), no output Communication port: RS485 |
| Pump controller | Power supply: 12V DC 1 digital dry input and 1 relay output contact max load AC250V/5A,DC30V/5A 433MHz, 1W power output Communication port: RS485 |
| Valve controller | 12V DC power supply or solar panel power supply. Battery type:
12.6V 4 isolated pulse outputs, can control 4 solenoid valves (9-36V)
separately 433MHz, 1W power output Power consumption: 40mA |
| |
How to connect master controller
About main controller’s DIP switch definition
How to connect expander
About Expander’s DIP switch definition
How to connect main pump
Pump controller DIP switch definition
How to connect valve controller
Conclusion:
- Please make sure all controllers in the same system setting with
the same channel
- One master to more slaves, please set different ID for slaves(valve
controller)
- Master side all COM- ports connect with irrigation controller’s C
port
